Belden grass valley ICONTROL IC-BASE-EDITION-ENT-V3, Quick Start Manual

Page: 14 / 23

12
Getting Started with iControl
Specifying Service and Alarm Discovery Locations
4 Click Do not start Lookup Service with RMID , if you do not want this Application
Server to run the Lookup Service.
5 Click Accept .
Specifying Service and Alarm Discovery Locations
To operate iC Web on client PCs on a subnet other than the one used by the iControl
Application Server, you must add the IP address of an Application Server running a lookup
service.
To add a lookup location for service and alarm discovery
1 Open the iControl admin page (see Opening iControl admin , on page 8).
2 In iControl admin, under iControl services , click Lookup locations .
The Lookup location page appears.
3 Under Service and alarm discovery , type the IP address and (optionally) the name of
an Application Server that is running a lookup service.