GUIDE TO INSTALLATION AND OPERATION
14
| HDA-3961
5.5 The Output panel
This panel controls the optical output functions (when equipped; see the
Status tab) related the HDA-3961 output:
Output Config
If an optical output is available, use the radio buttons to independently
turn the two optical outputs OFF or ON:
Optical output is only available for rear panels with a Fiber I/O
connector and an installed single or dual output (TX) cartridge
Optical output A, can only carry channel A
On an HDA-3961, optical output B can carry Channel A when the
Operating Mode is set to Single Channel (see the Input tab), or it
carries Channel B when the Operating Mode is set to Dual
Channel
5.6 The Alarms panel
This panel allows the alarm reporting of the HDA-3961 to be configured.
Click on the Alarm Config button to open the Alarm Configuration window.
Figure 3.9 Alarms panel and Alarm Configuration window
Figure 3.8 Output panel
– Dual
Channel Operating Mode
