manualshive.com logo in svg

Belden Grass Valley GV Korona, User Manual

Share
Download
Belden Grass Valley GV Korona User Manual Download Page 368

368

Advanced Operations

E-MEM Keyframe Triggers for Image Store Movies

E-MEM Keyframe Triggers for Image Store Movies 

Movie replay can be controlled with E-MEMs. Keyframe triggers that are E-MEMable are:

• Load (Movie),

• Loop (Enable/Disable),

• Bounce (when Loop is On)

• Cue (to in), and 

All Motion Controls: 

• Movie  Start,

• Reverse Play,

• Stop,

• Play,

• Movie End, and 

• Variable Speed Play (Var Play Speed button).

The selected Image Store channel has a blue outline. If that Image Store channel is On-Air, it 
has a red outline. The Stills, Movies, and Movie Record menus also allow direct loading of 
movies and stills to acquired Image Store channels. 

Summary of Contents for Grass Valley GV Korona


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands