manualshive.com logo in svg

Belden Grass Valley GV Korona, User Manual

Share
Download
Belden Grass Valley GV Korona User Manual Download Page 353

353

Kayenne/Karrera/GV Korona

User Manual

Image Store Stills

With K-Frame Image Store, still images are captured as Video/key or video-only and can be 
used as part of an effect or selected and loaded to output from the K-Frame Menu or 
Control Panel.

Imported Still File Formats

See 

Supported Image Store Formats

, on page 351.

Operating the Menu Panel

From the Image Store menu, you can perform the following with still images:

• Still capture and playback, 

• File operations (Library), and 

• Backup  and  restore.

Note:

Locally, still images are stored as .eif file format.

Summary of Contents for Grass Valley GV Korona


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands