Belden Grass Valley GV Korona, User Manual

Page: 289 / 433

289
Kayenne/Karrera/GV Korona
User Manual
For a sub-level, there are three states possible:
• Not assigned—Not controlled by an E-MEM, for example if you want manual control of
an Aux Bus and do not want it to be recalled by an E-MEM.
• Assigned to a E-MEM MISC Level—Under typical E-MEM control.
• Definable—Define which level will own a sub-level on an effect by effect basis.
With GV Switcher, sub-levels which are set to be defined can be ‘enabled’ in any level.
The the sub-levels for the E-MEM Preference levels can be made as ‘definable’ in the User
Setups, Suite Prefs, E-MEM Prefs, menu.
Make E-MEM Sub-levels Definable to Other Levels
1 In the User Setups, Suites Prefs, E-MEM Prefs menu, select an E-MEM Level.
2 Select the sub-level you wish to make definable.
3 Select the Definable button, lower right in the menu.
4 Repeat Steps 1 and 2 for each sub-level you wish to make definable.
The sub-level is now definable and can be defined to a level. The definable sub-levels are
not yet attached to a level.
Note: Sub-levels can only be defined to one level at time, for example if
Aux 1 and Aux 2 sub-levels are assigned to M/E-2 Primary, they are not
available to M/E-1 Primary.