Belden Grass Valley GV Korona, User Manual

Page: 276 / 433

276
Advanced Operations
Set the Enable Groups Associated with Auto Recall
Set the Enable Groups Associated with Auto Recall
Levels of the switcher can either be included or excluded from Auto Recall using the level
buttons in the Master E-MEM Module of the Control Panel.
1 Press Auto Recall in the Master E-MEM Module so it is on.
2 Press to enable the level buttons in the Master E-MEM you wish to include with Auto
Recall.
3 Press LRN , Auto Recall .
Set the Effect Dissolve Rate for Auto Recall in an E-MEM Register
Set the dissolve rate to seconds, frames, or fields; for example entering 1.0 results in a one
second dissolve rate where entering 10 results in a 10 frame dissolve rate, and entering .01
results in a one frame dissolve rate.
1 In the Master E-MEM Module of the Control Panel, press LRN , DIS , RTE .
2 Press the buttons under the keypad numbers to select seconds, frames, or fields for the
dissolve rate and press ENT .
3 Press the button for the register you wish to apply the effect dissolve rate.
Change Path Control Values in an Effect
Path control determines how interpolation is performed through keyframes. S-Linear,
Linear, and Curve path types are supported, in addition to Path Hold. These path types
provide fine control of the dynamics of the effect. See for background information.
1 Move to the location in the effect that you wish to change.
2 Go to the Path menu ( E-MEM & Timeline , Path ) and delegate the desired Level(s),
Sub-level(s), and Group(s). In the following example, the keyer wipe of Keyer 1 of M/E 1
has been selected for path control editing.