Belden Grass Valley GV Korona, User Manual

Page: 232 / 433

232
Device Control
Take XPression IDs from an External Device
Take XPression IDs from an External Device
The Standard GFX workflow allows you to take IDs from an external XPression device then
take the next IDs in the list. Functions are also provided to clear the active buffer and all
buffers.
1 Select Devices , GFX in the menu.
2 Select an ID by either scrolling with the soft knob or selecting the ID data pad and
entering an ID and selecting Enter .
3 Select Take ID .
4 Optionally, select Next to take the next ID in the list; repeat to take the next ID and so
on.
5 To clear the buffers, either select the Clear Active Buffer or Clear All Buffers .
Using Extended GFX XPression Controls
Setup XPression controls for an ID, a buffer, and a layer, and send those commands to your
external device. Typically, the commands are embedded in the ID but the menu function
buttons allow you to override or fine tune those controls and clear buffers.
1 Select Devices , GFX , Extended in the menu to access the GFX XPression controls.