Belden Grass Valley GV Korona, User Manual

Page: 188 / 433

188
Switching Basics
Device Control Module
Insert Dela y button—Changes the delegated macro row(s) to display Time Delay on the
SNDs in increments of seconds and tenths of a second (1st shift level—unshifted) or fields
(2nd shift level).
Record button—Enables the record operation. Pressing a button on a bus delegated to
Macros starts the recording, the recording is ended by pressing the Record button again or
pressing the Macro button (on the Source Select Module) again.
Device Control Groups
There are six Device Control groups for 25 and 35 button Source Select Modules and two
Device Control groups for 15 button Source Select Modules.
Each Device Control group provides a:
Cue/Load button—Pressing this button after the Prev or Next buttons have been pressed,
sends a load command if the clip is different from the clip currently loaded or a cue
command if the clips are the same.
Play button—Sends a Play command to the selected device (pressing Play a second time
pauses the device).
Display —Displays the current clip.
Prev button—One button press steps backward through the current directory of clips.
Next button—One button press steps backward through the current directory of clips.
Reboot indication—The left-most Device Control display is used as a frame reboot
indication and the next (to the right) Machine Control display is used to indicate a Control
Panel reboot.
Device Control Module
The Device Control Module brings together essential machine controls that are currently
being performed by auxiliary devices, into a single point of control.
Device Control Module Example
Go To
TC TC
Mark
In In
Link Link
Cue
Cue
Set Set
In
In
Mark
Out Out
Set Set
Out
Out
Cue Cue
Load
Loop Loop
Var
Sh Shutl
A B C D E F
G V / B r i g h t S t a r
I Ø Ø : Ø Ø : Ø Ø : 2 2 O U Ø Ø : Ø Ø : Ø 7 : 2 4
D Ø Ø : Ø Ø : Ø 7 : Ø 2 T C Ø Ø : Ø Ø : Ø Ø : Ø Ø
C S - 1 1 2 3 4 5 M I S C 4
LRN 9 8 7
SDEL 6 5 4
PAGE 3 2 1
BANK
0
8623267_12_r1