Belden Grass Valley GV Korona, User Manual

Page: 141 / 433

141
Kayenne/Karrera/GV Korona
User Manual
2 Press the Show button so that panel buttons with macros attached blink low tally.
3 Without selecting a macro register, press the blinking button that has the attachment
you wish to remove. The blinking button will turn off.
4 Press Show to turn off the mode.
To remove all macros, go to the Macros Attach menu and select Remove All Macros button
(warning will appear to confirm remove all).
Append to a Macro
1 Turn on Macro append mode by holding down the Record button for a full second. The
button will turn blue and blink slowly until a macro is selected.
2 Press the macro register button on the delegated keyer row of an existing macro to
which you wish to append additional steps. The Record button will remain colored blue
and blink fast, indicating a Macro is being recorded.
3 Perform the additional steps using the Control Panel and/or the menus.
4 Complete the append by pressing the blinking Record button, or pressing the blinking
keyer row macro register button.
GV Korona K-Frame Macro Operations
You can record, enable, append, and show the macro attachments on the Control Panel
using the GV Korona Status Display. Use the GV switcher menu for the other macros
functions, including pre-attach, post-attach, delete, etc.
GV Korona Status Display in Macro Mode
Status Display in Macro Mode
The Att Enable button enables and disables all macro button attachments globally. When
on, pressing Control Panel buttons with macros attached will run those macros. When off,
macros can only be played back by activating macro mode and pressing the macro register
buttons, or with the Macro menu.
The Show Attach button activates a mode that low tally blinks Control Panel buttons that
have macros attached.