Belden Grass Valley GV Korona, User Manual

Page: 135 / 433

135
Kayenne/Karrera/GV Korona
User Manual
Insert a Macro User Pause
The Macro User Pause is part of the Insert Delay feature. A press of the USER button in the
Source Select Module inserts the User Pause during the macro recording process. When the
macro is run, it will pause and must be manually resumed (the macro is considered running
when paused, not stopped).
1 Press the Rec button.
2 Press the Macro button on the right side of the Source Select module to delegate the
module.
3 Press a macro delegated button to start recording.
4 Perform any actions to be recorded as part of the macro before inserting the User
Pause.
5 Press Insert Delay .
Result: USER is displayed in the source select OLED, third button from the right.
Control Panel Macro USER Button in Macro Delegation
6 Press USER to insert a User Pause.
7 If desired, perform any additional actions to be recorded.
8 Press the Rec button again to stop the recording.
9 Run the macro.
Result: Any Control Panel button associated with the running macro will tally purple
indicating the User Pause.
10 Press any purple tallied button to resume.
Result: Once completed, the macro button high tallies the macro color.
Resuming a Paused Macro
Buttons delegated to macros or with macros attached in a paused state, tally purple. Press
the purple tallied button to resume the macro.
Note: Stopped macros tally the macro color, running macros tally
orange. Pressing a button with a running macro delegated or attached,
stops the macro (pressing it again starts the macro from the beginning).