Belden Grass Valley CopperHead 3404, User Manual

Page: 93 / 113

87
Camera Unit Connectors
Camera Unit Connectors
Item Description
Camera Remote: Data 1 (Camera Control) and Data 3 (RS232)
Camera Unit #7
Hirose 10-Pin Female
Pin 5 (Format select)
Floating for RS-422 or TTL
Tied to GND for RS-232
Tied to +12VDC for RS-485
• Pin 1 : +12VDC Input Power (also Camera Control Data
Format Select Bias)
• Pin 2 : 12VDC Input Power - Ground
• Pin 3 : Camera Control Data (+) Input or Di-directional
Camera Control Data I/O
• Pin 4 : 232 Data Input (Data 3)
• Pin 5 : Camera Control Data Format Select (see choices
to left)
• Pin 6 : Camera Control Data (-) Output
• Pin 7 : Ground (Camera Control Data Shields, 232 Data
Common)
• Pin 8 : 232 Data Output (Data 3)
• Pin 9 : Camera Control Data (-) Input
• Pin 10 : Camera Control Data (+) Output
Mating connector: Hirose HR10A-10P-10P.
See Data 1 (Camera Control) Pinout Configurations on
page 89 for pinout configuration.
Production/Signal
Camera Unit #8
DB15HD Female
Pin 10 (Data 2 Format select)
Floating for RS-422 or TTL
Tied to GND for RS-232
Tied to +12VDC for RS-485
• Pin 1 : Data 2 -422 Out
• Pin 2 : Data 2 -422 In, -485 I/O
• Pin 3 : Intercom Microphone Trigger
• Pin 4 : GPI In
• Pin 5 : GND
• Pin 6 : Data 2 232 OUT, +422 Out
• Pin 7 : GND
• Pin 8 : Data 2 232 In, +422 In, +485 I/O
• Pin 9 : Not Used
• Pin 10 : Data2 Format (see choices to left)
• Pin 11 : GPI 2 OUT B (Green)
• Pin 12 : GPI 2 OUT A (Green)
• Pin 13 : GPI 1 OUT B (Red)
• Pin 14 : GPI 1 OUT A (Red)
• Pin 15 : +12VDC (100mA max)- Bias for Format
Power Wafer
Camera Unit #15
Lemo 4-pin Female
• Pin 1 : 95VDC+
• Pin 2 : Not Used
• Pin 3 : 95VDC-
• Pin 4 : Not Used
Mating connector: Lemo FGG.0B.304.CLAD42 (right
angle)
Camera Headset