Belden 934 879-009 Manual Download Page 10

Page: 10 / 98

2.2 Qualified personnel

2 Safety instructions

Information on which cables and accessories are permitted for the installation

can be obtained from Lumberg Automation™ or is contained in this manual.

2.2 Qualified personnel

The configuration, installation, start-up, maintenance, and testing of the

devices may only be performed by a qualified electrician who is familiar with

the safety standards of the automation technology.
The personnel requirements are based on the requirement profiles described

by ZVEI, VDMA, or equivalent organizations.
Only electricians who are familiar with the content of this manual are

authorized to install and maintain the devices described. These are persons

who

based on their technical training, knowledge, and experience, and their

knowledge of the pertinent standards, can evaluate the work to be carried

out and identify any potential risks or

based on working for several years in a related sector, have the same level

of knowledge as they would have from the relevant technical training.

Only Belden Deutschland GmbH – Lumberg Automation

is permitted to

make changes to the hardware or software of products that go beyond the

scope of this manual.

Warning:

Making unqualified changes to the hardware or software,

or non-adherence to the warning information contained in this manual,

can result in serious personal injury or damage to equipment.

Manual LioN-P EtherNet/IP

Version 2.0 11/2017

Summary of Contents for 934 879-009



































































































Search results

Summary of Contents for 934 879-009

Reviews:

Related manuals for 934 879-009

Brands by name

Popular brands

Belden 934 879-009, Manual

Search results

Summary of Contents for 934 879-009

Reviews:

Related manuals for 934 879-009

Brands by name

Popular brands