Belanger Top Wheel Mix & Match, Owner'S Manual

Page: 53 / 80

TOP WHEEL
Mix and Match
1MANUL749
Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681
49
Maintenance
Routine Procedures
Daily
•
Start with a
“Test Wash” to insure proper operation of all equipment.
•
Check overall performance for any abnormalities.
•
Inspect for clogged nozzles. This
can best be done while running the “Test Wash”. Nozzles
can be cleaned by removing the nozzle bodies and tapping or inserting a thin wire into the
nozzle opening.
•
Make sure cleaning material is not tangled.
•
Check for water and/or chemical leaks after equipment is turned off.
Weekly
•
Verify that clamps on ends of wash media are tight to the media and secured in place.
•
Check weights on the wheel to confirm the desired balance. Adjust as necessary.
•
Check penetration weight of the Top Wheel. Add or remove counterweight as needed.
•
Go through the Hub Assembly and make sure that all fasteners that hold the Hub Adaptors,
are in place and tight.
•
Hose down the component and surrounding area. This will remove the majority of the dirt
and other debris that builds up during a week.
Monthly
•
Wash component down with a good degrimer such as laundry detergent and hot water.
•
Check wash material for wear. Replace if necessary.