TOP WHEEL
Mix and Match
1MANUL749
Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681
33
Installation
Frame Assembly
Posi-Stops Installation
1) Locate the Posi-Stop mounting parts shown below.
2) Slide the spacer over the longer mount (below, right) and secure the two 3
” (7.6 cm) Rubber
Stop Spacers to the posts as shown below.
3”
(7.6 cm)
Rubber-Stop
Spacer
Posi-Stop
Down Mount
Posi-Stop
Up Mount
2-
1/4” x 1
-
1/4”
Spacer
Up Mount with
2-
1/4” x 1
-
1/4” Space
r
Down Posi-Stop Mount with
3”
(7.6 cm)
Rubber-Stop Spacer
Posi-Stop Up Mo
unt with 3”
(7.6 cm) Rubber-Stop Spacer
3) Secure the Posi-Stop mount assemblies into place on both legs as shown below.
4) Locate the two Posi-Stops and the four white plastic sleeves shown below. Pinch the sleeve
together and slide it into the rubber stop. Slide the rubber stops onto the mounts.
5)
Screw the “Down” Rubber Stop until the wheels center height is at 53” (1.35 m) and verify
that the shock does not make contact with the Stop Block.
Note:
Make sure that both arms make contact with the rubber stops.
Plastic
Sleeve
Rubber Stop
Stop
Block
“
Dow
n”
Rubber
Stop
Up
Down
Stop
Block
Taller mount
is to be
installed on
the entrance
side
3”
(7.6 cm)
Rubber Stop
Spacer
Direction of Travel
Direction of Travel
Mount Posi-
Stops on driver
side leg here
Summary of Contents for Top Wheel Mix & Match
Page 1: ...Top Wheel Mix Match 1MANUAL749 Rev12 Top Wheel Mix Match ...
Page 2: ......
Page 79: ......
Page 80: ......