Belanger Fusion X2 PRO, Owner'S Manual

Page: 44 / 68

FUSION
™ CARWASH CONTROLLER
5-8
Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL965
Chapter 5 Operator Interface/Wash Setup Screens
Setup
Setup / Loading
Loading is the process of placing a vehicle on the Conveyor and getting it moving through the Photo-Eyes with proper
Dollies. There are 2 Loading screens. They are covered below and on the following 2 pages.
Loading Setup 1 (first screen)
Pressing the LOADING key will take you to the following screen.
•
DOLLIE UP COUNT : This function toggles back and forth between “Count” and “Inches”. This determines
whether the “Dollie UP” fork stays up according to Dollie Travel Distance or by Dollie Counts. Count is
recommended, count requires a dollie count switch. If switched to inches, the AUTO FRONT/BACK inches
must be set to achieve desired Dollies. If you are experiencing trouble with the Dollie count input or your system
does not have Dollie count, change it to INCHES and set distance accordingly.
•
FRONT AUTO DOLLIE : This function toggles back and forth between “ON” and “OFF”. When set to “ON”,
Dollie will automatically be called up when a front tire passes over the Treadle. It must be OFF for Rear Push.
FRONT AUTO DOLLIE must be ON before any Front Auto Dollie functions will activate.
•
REAR AUTO DOLLIE : This function toggles back and forth between “ON” and “OFF”. When “ON”, Dollie will
automatically be called up when the rear tire is over the Treadle. This function is on in most systems. REAR
AUTO DOLLIE must be ON before any Rear Auto Dollie functions will activate.
•
AUTO FRONT DOLLIES / INCHES : This function determines the two following items.
•
If Dollie Up is set to COUNT, this displays the number of Dollies that will pop up behind the front tire when the
output is activated. FRONT AUTO DOLLIE must be ON.
•
If Dollie Up is set to INCHES (Not Recommended), this displays the number of inches the Dollie Up fork will
remain up. (Generally, set at Dollie spacing times the number of Dollies desired).
•
AUTO BACK DOLLIES / INCHES : This function determines the two following items.
•
If Dollie Up is set to COUNT, this displays the number of Dollies that will pop up behind the rear tire. REAR
AUTO DOLLIE must be ON.
•
If Dollie Up is set to INCHES (Not Recommended), this displays the number of inches the Dollie Up fork will
remain up. (Generally, set at Dollie spacing times the number of Dollies desired).
•
DOLLIE CALL DOLLIES / INCHES : This function determines the two following items.
•
If Dollie Up is set to COUNT, this displays the number of Dollies that will pop up when the Dollie Call button is
pressed.
•
If Dollie Up is set to INCHES (Not Recommended), once a Dollie-Up Fork pops up, this displays the number
of inches the Dollie Up fork will remain up after Dollie Call button is pressed.