No drip performance
for life
Should your Bélanger faucet leak or drip under normal use during any period following date
of purchase by the original owner, Bélanger will replace the defective cartridge for
installation by the owner to put the faucet back in good operating condition. All you need to
do is call our toll-free number for warranty assistance. Proof of purchase (original sales
receipt) from the original owner must accompany all warranty claims. All other components
are covered by a 2-year warranty. The finish is guaranteed for life.
THIS WARRANTY DOES NOT COVER:
1.
Labor charges or related cost for removing or installing any defective part;
2.
Damage done to the parts or faucet which results from abuse or
negligence; and
3.
Incidental or consequential damages resulting from any defect in your
Bélanger faucet.
In some areas, the exclusion or limitation of incidental or consequential damages is not
allowed, therefore the above limitations may not apply to you.
This warranty gives you specific legal rights. You may have other rights, which vary, from
area to area.
6520 Abrams Street, Saint-Laurent QC Canada H4S 1Y2
Toll free phone #: 1-800-361-5960 Toll free fax #: 1-888-533-8313
Thank you for choosing
a Bélanger product
Belanger says welcome to economical do-it-yourself plumbing. We want
you to know that we believe you have made a wise choice in selecting a
Bélanger quality faucet. We stand firm behind all of our products in order
to ensure that you, the consumer, get full satisfaction and use from your
new acquisition.
Bélanger top quality plumbing products have earned a strong reputation
and are designed to give you many years of reliable, trouble-free use.
This owner's manual should be a very useful tool in helping you install
your Bélanger faucet. We strongly recommend that you read all the
necessary instructions carefully before you begin.
Should you need any help, please call our Help Line:
HELP LINE: 1-800-361-5960
MONDAY TO FRIDAY
8:00 AM TO 4:30 PM E.S.T.
Owner's manual
FOR 2-HANDLE LAUNDRY FAUCETS
WITH CERAMIC CARTRIDGES
MODELS 7047 (WITH PLATE) ET 7046 (WITHOUT PLATE)
(Français au verso)
Installing your new faucet (7047)
Step 1.
Shut off the water supply valves of the existing faucet. Remove the old
faucet.
Step 2.
Connect and solder inlet and outlet
copper pipes as shown.
Step 3.
Secure faucet to wall using an
appropriate screw (not included).
Step 4.
Slide one black plastic spacer over
each valve as shown. Place plastic cover over
faucet. Cut out cover plate for copper pipes to
pass through.
Step 5.
Screw one black plastic flange on
each valve to hold plastic cover in place.
Install handles.
Step 6.
Connect washing machine hoses to
faucet. Turn on water supply and inspect the connections for leaks. Your
new Bélanger faucet is now fully installed and ready to use.
BIRO 7046-7047
Installing your new faucet (7046)
Step 1.
Shut off the water supply valves
of the existing faucet. Remove the old
faucet.
Step 2.
Connect and solder inlet and
outlet copper pipes as shown.
Step 3.
Secure faucet to wall using
appropriate screws (not included).
Step 4.
Slide one chrome plated flange
over each valve as shown and tighten
set screws. Install handles.
Step 5.
Connect washing machine
hoses to faucet. Turn on water supply
and inspect the connections for leaks. Your new
Bélanger faucet is now fully installed and ready to use.
Important
: The Canadian Plumbing Code requires the installation of air
chambers or surge arresting devices to eliminate water hammer.
Important
: Take note of the different standards and
rules your local and municipal plumbing codes have in
effect before installing.
Air
Cold supply
Hot supply
Cold
supply
Hot
supply
