No drip performance
for life
Should your Bélanger faucet leak or drip under normal use during any period
following date of purchase by the original owner, Bélanger will replace the
defective cartridge for installation by the owner to put the faucet back in good
operating condition. All you need to do is call our toll-free number for warranty
assistance. Proof of purchase (original sales receipt) from the original owner must
accompany all warranty claims. All other components are covered by a 2-year
warranty. The finish is guaranteed for life.
THIS WARRANTY DOES NOT COVER:
1.
Labor charges or related cost for removing or installing any defective part;
2.
Damage done to the parts or faucet which results from abuse or
negligence; and
3.
Incidental or consequential damages resulting from any defect in your
Bélanger faucet.
In some areas, the exclusion or limitation of incidental or consequential damages is
not allowed, therefore the above limitations may not apply to you.
This warranty gives you specific legal rights. You may have other rights, which
vary, from area to area.
6520 Abrams Street, Saint-Laurent QC Canada H4S 1Y2
Toll free phone #: 1-800-361-5960 Toll free fax #: 1-888-533-8313
Thank you for choosing
a Bélanger product
Bélanger says welcome to economical do-it-yourself plumbing.
We want you to know that we believe you have made a wise
choice in selecting a Bélanger quality faucet. We stand firm
behind all of our products in order to ensure that you, the
consumer, get full satisfaction and use from your new
acquisition.
Bélanger top quality plumbing products have earned a strong
reputation and are designed to give you many years of reliable,
trouble-free use.
This owner's manual should be a very useful tool in helping you
install your Bélanger faucet. We strongly recommend that you
read all the necessary instructions carefully before you begin.
Should you need any help, please call our Help Line:
HELP LINE: 1-800-361-5960
MONDAY TO FRIDAY
8:00 AM TO 4:30 PM E.S.T.
Owner's manual
FOR 4" LAVATORY FAUCETS
CERAMIC DISCS CARTRIDGE
FOR THE 4023 and 4123 SERIES
(Français au verso)
Installing your new faucet
Important
: Take note of the different standards and rules your local
and municipal plumbing codes have in effect before installing.
Step 1.
Shut off the water supply valves of the existing
faucet.
Step 2.
Remove the old faucet. Properly clean surface
on which faucet is to be installed.
Step 3.
Insert the faucet tubes and threaded studs
through the holes in the basin or counter top. From
underneath the basin, place one holding plate and one
locknut on each threaded stud and tighten gently by
hand. Now, position the
faucet for proper alignment on top of
basin or counter top. Tighten the locknuts
with
the Bélanger tool provided.
(Diag. A)
Do not overtighten.
Step 4.
The riser tube lines are now ready
to be connected. Fit existing riser tube lines
to faucet inlets, by threading existing
coupling nuts onto brass adapters and
tighten to form a watertight joint.
(Diag. B)
If existing riser tube lines are damaged in
any way, install new ones.
Step 5.
Turn on water supply and inspect the coupling nut
connections for leaks. Tighten nuts if necessary. Unscrew aerator.
Turn the faucet on in the warm position (center position) for at least
one minute to evacuate the air trapped in the pipes. Replace aerator.
Your new Bélanger faucet is now fully installed and ready to use.
Important
: The Canadian Plumbing Code requires the installation of
air chambers or surge arresting devices to eliminate water hammer.
BIRO 4023CP
Diag. A
Diag. B
