EN / 44
Washing Machine / User’s Manual
9.4.2 "Functions/Programmes Selected by
Pressing the Function Buttons for 3 Seconds"
• Drum Clean
CAUTION!
• This is not a Laundry washing programme. It is a
maintenance programme.
• Do not run this programme when there are any objects in
the machine. If you try to do so, the machine detects that
there is a load inside and aborts the programme.
This programme is selected by pressing the 1st auxiliary function key for 3
seconds.
Run this programme with the machine unloaded on a regular basis (once
a month or every two months) to clean the drum. To obtain better results,
put powder lime-scale remover for washing machines into the detergent
compartment no. “2”. This programme contains a drying step that runs after
the drum cleaning step to dry the inside of the machine.
• Anti Crease
This function is selected when the 3th auxiliary function is pressed and held
for 3 seconds and the programme follow-up light for the relevant step turns
on.
When selected, it aerates the laundry for up to 8 hours at the end of
the programme to prevent creasing. You can cancel the programme and
take your laundry out at any time during the 8-hour duration. Press the
function selection key or the machine on/off key to cancel the function. The
programme follow-up light will remain on until the function is canceled or
the step is complete. If the function cannot be cancelled, it will be active in
the subsequent washing cycles as well.
• Child Lock
Use Child Lock function to prevent children from tampering with the
product. Thus you can avoid any changes in a running programme.
NOTE
• You can switch on and off the product with On / Off button
when the Child Lock is active. When you switch on the
product again, programme will resume from where it has
stopped.
