Beko WTZ101435BI, User Manual

Page: 59 / 68

59 / EN
Washing Machine / User’s Manual
Opening the loading door in case of power failure:
C
In case of power failure, you can use the loading door emergency handle under the pump filter cap to open the loading
door manually.
A
WARNING:
To avoid any water overflow before opening the loading door, make sure there is no water left inside the
machine.
• Open the pump filter cap.
•
Release the loading door emergency handle located at
the rear side of the filter cap.
• Pull down the loading door emergency handle once and
open the loading door. After opening the loading door, re-
insert the loading door emergency handle.
• If the loading door does not open, try again by pulling
down the handle.
4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started :
If the water level in the machine is suitable when you press
Start/Pause
button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off
when the door lock is deactivated. After adding garments, close the door and press
Start/Pause
button once
again to resume the washing cycle.
1888
88:88
88
C 0
If the water level in the machine is not suitable when you press Start/Pause button, the door lock cannot be
deactivated and the door lock icon on the display remains on.
1888
88:88
88
C 0
C
If the temperature of the water inside the machine is above 50°C, you cannot deactivate the door lock for safety reasons,
even if the water level is suitable.