5 / EN
Washing Machine / User Manual
1
General safety instructions
This section includes security instructions which may help prevent
the injuries and material damage risks. All kinds of warranties shall
be invalid if these instructions are not observed.
1.1 Life and property safety
u
Never place the product on a carpet-covered floor. Electrical parts
will get overheated since air cannot circulate from under the device.
This will cause problems with your product.
u
Unplug the product if it is not in use.
u
Always have the repairing procedures carried out by an Authorised
Service Agent. The manufacturer shall not be held liable for damages
that may arise from procedures carried out by unauthorised persons.
u
The water supply and draining hoses must be securely fastened and
remain undamaged. Otherwise a water leak may occur.
u
While there is water inside the product, never open the loading door
or remove the filter. Otherwise, risk of flooding and injury from hot
water will occur.
u
Do not force open the locked loading door. The door can be opened
a few minutes after the washing cycle ends. In the case of forcing
the loading door to open, the door and the lock mechanism may get
damaged.
u
Use detergents, softeners and supplements suitable for automatic
washing machines only.
u
Follow the instructions on the label of textiles and the detergent
package.
u
The water supply pressure required to run the product is between 1
to 10 bars (0.1 – 1 MPa).
u
Do not use old or used water inlet hoses on the new product. It may
cause stains on your laundry.
Summary of Contents for WTL64051B
Page 39: ......
