Washing Machine / User‘s Manual
29 / EN
6
Quick User Guide
6.1 Preparing the machine
1. Make sure that the hoses are connected
tightly.
2. Plug in your machine.
3. Turn the tap on completely.
4. Place the laundry in the machine.
5. Add detergent and fabric softener.
6.2 Programme selection
Select the programme suitable for the type,
quantity and soiling degree of the laundry
in accordance with the „Programme and
consumption table“ and the temperature table
below.
6.3 Auxiliary function selection
Use the following auxiliary functions according
to your daily needs. Select the desired auxiliary
functions before starting the programme.
Furthermore, you may also select or cancel
auxiliary functions that are suitable to the
running programme without pressing the Start
/ Pause button when the machine is operating.
For this, the machine must be in a step before
the auxiliary function you are going to select
or cancel.
If the auxiliary function cannot be selected
or cancelled, light of the relevant auxiliary
function will blink 3 times to warn the user.
6.4 Starting the programme
1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing the
startup of the programme will turn on.
C
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode and
the illumination level of the temperature,
speed and loading door indicator lights
will decrease. Other indicator lights
and indicators will turn off. Once the
Programme Selection knob is rotated or
any button is pressed, indicator lights
and indicators will turn on again.
6.5 Cancelling the programme
To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be cancelled. End /
Cancel light will flash continuously to notify
that the programme has been cancelled.
Your machine will end the programme
when you turn the Programme Selection
knob; however, it does not drain the water
inside. When you select and start a new
programme, the newly selected programme
will start depending on the step the previous
programme was cancelled in. For example, it
may take in additional water or continue to
wash with the water inside.
C
Depending on the step where the
programme was cancelled in, you may
have to put detergent and softener
again for the programme you have
selected anew.
