Installation and operating manual
EN
10 METPOINT
®
BDL compact
6. Technical data
Colour display
3.5" touch panel, TFT transmissive
Supply voltage
1)
100 … 240 V AC
1Ph / PE
50 … 60 Hz
Power supply line
2)
Max. cable jacket diameter: 6.7 mm
Wire cross-section: 0.75 mm²
with safety plug and
PE conductor
Max. power consumption
25 VA
Supply voltage for sensors
24 V DC (± 10%)
Output current - analog board
120 mA in total for both channels
Output current - digital board
120 mA in continuous mode / channel
Max. output current through all channels
280 mA
Ambient temperature during operation
0°C … +50 °C
Storage and transport temperature
-20°C … +70 °C
Ambient air humidity
0 … 95 %, no condensation
Protection class
3)
IP 44, EN 60529
Lithium manganese dioxide battery
4)
Panasonic CR2032
Connections
7 x cable connection M12x1.5
Body: Brass, nickel-plated
Terminal size: 3-7 mm, WS=16 mm
Tightening torque: 8 Nm
1x RJ45 for Ethernet connection
Interfaces
USB memory stick (USB 2.0)
Ethernet interface, Modbus TCP
RS485 interface, Modbus RTU
SDI interface (Serial Data Interface)
Sensor inputs
4 (2x2) sensor inputs for analog and digital sensors, free assignment
Sensor signals
5)
Analog signals: 0 - 1/10/30 V
Pulse signals
Pt100; Pt1000
Digital signals: RS485, BEKO-SDI
Alarm outputs (alarm relays)
2x floating switchover contacts
freely programmable, alarm management
Analog output and pulse output
Looped with sensors with own signal output, e.g. FS / DP series
Data logger
4 GB memory card (micro SDHC class 4)
Housing material
Housing: Powder-coated aluminium
Polyester front foil (anti-glare)
3M adhesive (3M7952 / 3M467)
Weight
2.7 kg
Dimensions W x H x D
180 x 166 x 115 mm
Optional
Web server
Optional
Galvanically insulated pulse output (2x)
max. 30V AV / 60V DC ; 250mA
Optional
Ethernet and RS485 interface
Modbus protocol