Beko ECO WMB 81445 LW, Installation & Operating Instructions And Washing Guidance

Page: 29 / 44

29 / 44 EN
6 Quick User Guide
6.1 Preparing the machine
1. Make sure that the hoses are connected tightly.
2. Plug in your machine.
3. Turn the tap on completely.
4. Place the laundry in the machine.
5. Add detergent and fabric softener.
6.2 Programme selection
Select the programme suitable for the type,
quantity and soiling degree of the laundry
in accordance with the "Programme and
consumption table" and the temperature table
below.
6.3 Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. Furthermore, you may
also select or cancel auxiliary functions that are
suitable to the running programme by pressing
the Start / Pause / Cancel button when the
machine is operating. For this, the machine must
be in a step before the auxiliary function you are
going to select or cancel.
6.4 Starting the programme
1. Press Start / Pause / Cancel button to start the
programme.
2. Start symbol showing the startup of the
programme will turn on.
3. Loading door is locked and Door Locked symbol
appears on the display.
4. The symbol of the step from which the
programme has started appears on the display
(Prewash, Main Wash, Rinse, Softener and
Spin).
6.5 End of programme
“End” appears on the display at the end of the
programme. Symbols of the programme steps
remain lit. Auxiliary function, spin speed and
temperature that were selected at the beginning
of the programme remain selected.
6.6 Cancelling the programme
Press and hold Start / Pause / Cancel button
for 3 seconds. Start symbol flashes. Symbol of
the step at which the programme was cancelled
remains lit. “ End ” appears on the display and the
programme is cancelled.
6.7 Child Lock
Use Child Lock function to prevent children from
tampering with the machine. Thus you can avoid
any changes in a running programme.
C
You can switch on and off the machine
with On / Off button when the Child
Lock is active. When you switch on the
machine again, programme will resume
from where it has stopped.
To activate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function
buttons for 3 seconds. “Con” appears on the
display.
C
Same phrase will appear on the display
if you press any button when Child Lock
is enabled.
To deactivate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function
buttons for 3 seconds. “COFF” appears on the
display.
C
Do not forget to disable the child lock
at the end of the programme if it was
enabled before. Otherwise, machine will
not allow to select a new programme.