4
USA
2. INSTALLATION
A
WARNING:
When installing
the dishwasher, follow basic
precautions, including the
following:
Please check the standarts and local codes
for placement of machine.
•
Installation, maintenance and repair
should be performed by a qualified
installer. Work by unqualified persons
could be dangerous and may void the
warranty.
•
Do not operate the appliance if
damaged, malfunctioning, partially
disassembled or if it has missing or
broken parts.
•
Before installation or service,
disconnect the power supply to
the work area by unplugging the
unit, “tripping” the circuit breaker or
removing the fuse.
•
Only connect the dishwasher to the
power supply when all installation and
plumbing work is complete.
•
Never connect the ground wire to gas
lines, or hot water pipes, plumbing
lines.
•
Do not install or store the dishwasher
where it can be exposed to below
freezing temperatures or exposed to
weather.
•
Dishwasher must be secured to
adjacent cabinetry using the brackets
provided. Failure to do this may cause
damage to property or bodily injury.
•
Connect to a properly rated, protected
and sized power supply circuit to avoid
electrical overload. The dishwasher
is designed for an electrical supply
of 120 V (volts), 60 Hz (hertz), AC,
connected to a dishwasher-dedicated,
properly grounded electrical circuit
with a fuse or breakers rated for 15
amperes. Electrical supply conductors
shall be a minimum of # 16 AWG
copper wire rated at 75 °C (167 °F) or
higher. These requirements must be
met to prevent injury and machine
damage. Consult a qualified electrician
if in doubt.
•
Do not use any extension cord or
portable outlet device to connect the
dishwasher to a power supply.
A
WARNING:
Danger of
suffocation! Ensure that any
plastic wrappings, bags, small
pieces etc. are disposed of
safely and kept out of the reach
of children.
Summary of Contents for DUT25400B
Page 45: ......