background image

14

Dishwasher / User’s Manual

/42 EN

Preparation

If the water hardness level adjustment is 

set to level 1, the “No salt warning indicator” 

will illuminate continuously although it 

is not necessary to use salt. If you use 

salt under this condition, salt will not be 

consumed and the Salt indicator will not 

illuminate.

C

If you move your house, it is 

necessary to readjust water 

hardness level of your machine 

by considering the information 

given above according to the 

hardness level of the supply 

water in your new location. 

Your machine will display the 

most recently adjusted water 

hardness level.

Adding salt

Water softening system needs to be 

regenerated in order for the product 

operates with the same performance 

continuously.  Dishwasher salt is used for 

this purpose. 

C

Use only special softening salts 

produced particularly for the 

dishwashers in your machine.

C

It is recommended to use 

granule- or powder-formed 

softening salts in the water 

softening system. Do not use 

salts that do not completely 

dissolve in water such as table 

salt or rock salt.  Otherwise the 

performance of the system may 

deteriorate in time.

C

Salt reservoir will be filled 

with water when you start 

the product.  For this reason, 

add salt before operating the 

machine.

1.  Firstly, take the lower basket out to add 

softening salt.

2.  Turn the salt reservoir lid counter-

clockwise to open it (A).

3.   Add 1 litre of water to salt reservoir of 

your machine only in initial use.

4.  Fill the salt reservoir with salt by 

using the salt funnel (D). To speed up 

dissolution rate of salt in water, stir it 

with a spoon.

C

You can put about 2 kg of 

softening salt into the salt 

reservoir.

5.  Replace the lid and tighten it when the 

reservoir is full.

Summary of Contents for DSN04310X













































Reviews: