background image

27

EN

Scheduling the washing 

time

Time Delay

If an economical electricity tariff is 

applied in your region, you can use 

the Time Delay function to wash your 

dishes during appropriate hours.

You can delay the start of the 

selected programme until 24 hours.

1.  Press the Time Delay function 

key after selecting the washing 

programme and other auxiliary 

functions.

2.  Once you press the Time Delay 

key, Display Information Line 

will show "0:30" and Time Delay 

indicator will start flashing.

3.  Set the desired time by pressing 

the Time Delay key. Time will 

increase with increments of 30 

minutes up to 6 hours and after 

that in 1 hour increments up to 24 

hours every time you press the 

key.

4.  Close the door of your machine 

after setting the Delayed Start. 

Floor illumination

Warning to show that machine is 

in washing phase 

(depends on the model)

Your machine reflects a light to the 

floor during the washing process. 

This light turns off after the washing 

process is complete.

Floor illumination is activated 

automatically when the washing 

programme starts and remains lit 

until the end of the programme.

Floor illumination cannot be 

cancelled by the user.

InnerClean

This programme is recommended 

to be operated on each 1-2 months 

for machine cleaning and necessary 

hygiene.  The programme should be 

operated while the machine is empty.

In order to achieve an efficient result, 

it is recommended to use together 

with special machine cleaning agents.

A

   Do not use Machine Cleaning 

programme to clean dishes.  As it 

operates in high temperatures, it 

is harmful for the dishes.

Changing the interior lighting 

setting

1.  After turning on the machine, 

press Time Delay and P/P+ keys 

simultaneously. Continue to press 

until the countdown 3, 2, 1 is 

completed on the display.

2.  Press P/P+ key to activate the 

L: option. The interior lighting 

is turned off at "L:0" option and 

turned on at "L:1" option. Set the 

desired option with the Time 

Delay key. 

3.  Turn off the machine with On/Off 

key to save the changes.

Changing Warning Sound Volume

1.  After turning on the machine, 

press Time Delay and P / P+ 

keys simultaneously. Keep them 

pressed until the countdown 3, 2, 

1 is completed on the display. 

2.  Press P / P+ key to activate the S: 

position.

3.  Each pressing on the Time Delay 

key will change the warning sound 

volume as "S:0" off, "S:1" medium" 

and "S:2" high.

4.  Turn off the machine with On/Off 

key to save the changes.

Factory setting of your machine is 

“S:2”.

Summary of Contents for DIS39020











































Reviews: