background image

37

EN

the protective cover on the surface and causing discoloration.

•  Intensive cleansers such as bleaches are used. >>> Protective cover on 

metal surfaces gets damaged and looses its efficiency in time when it gets 

in contact with cleansers such as bleach. Do not wash your dishes with 

bleach.

•  Metal items particularly such as knives are used for purposes other then 

their intended uses.  >>> Protective cover on the edges of knives may get 

damaged when they are used for purposes such as opening cans. Do not use 

metal kitchen utensils out of their intended uses.

•  Silverware are made of low quality stainless steel. >>> Corrosion on such 

items is inevitable; they should not be washed in dishwashers.

•  Kitchen utensils that are already corroded are washed in dishwasher. >>> 

Rust on a corroded item can migrate to other stainless steel surfaces and 

cause corrosion on those surfaces as well. Such items should not be washed 

in dishwashers.

Detergent remains in detergent dispenser.

•  Detergent dispenser was damp when adding detergent. >>> Make sure that 

the detergent dispenser is dried well prior to filling it with detergent.

•  Detergent is added long before the washing process. >>> Pay attention to 

add detergent shortly before start-up of the washing.

•  Opening of the detergent dispenser lid is prevented during washing. >>> 

Place the dishes in a way that will not prevent the detergent dispenser lid 

from opening and the water going into the machine from impellers.

•  Detergent is stored under unsuitable conditions. >>> If you are using 

powder detergent, do not store the detergent package in humid places. 

Keep it in a closed container if possible. For ease-of-storing, we recommend 

you to use tablet detergents.

•  Impeller holes are clogged. >>> Lower and upper impeller holes might 

be clogged with food remnants such as lemon pips. Clean the impellers 

regularly as illustrated in section "Cleaning and Care".

Decorations and ornaments on kitchen utensils are being erased.

C

  Decorated glasses and decorated luster porcelains are not suitable for 

washing in the dishwasher. Manufacturers of glassware and porcelain 

tableware items do not recommend washing such kitchen utensils in the 

dishwashers either.

Dishes are scratched.

C

  Kitchen utensils that contains or are made of aluminum should not be 

washed in dishwasher.

Summary of Contents for DFS26010B












































Reviews: