Beko BRH60TW, User Manual

Page: 9 / 20

9 / EN
Range Hood / User Manual
•
The exhaust air must not be discharged into a
flue which is used for exhausting fumes from
other appliances burning gas or other fuels. (Not
applicable for appliances which only discharge
air back into the room)
•
The minimum distance between the suppor-
ting surface for the cooking vessels on the hob
and the lowest part of the range Range Hood:
When the range Range Hood is located above
a gas appliance, this distance shall be 65cm. If
the instructions for installation for the gas hob
specify a greater distance, this must be taken
into account. (The distance of 65 cm can be re-
duced for non combustible parts of range Range
Hoods and parts operating at safety extra low
voltage provided these parts do not give access
to live parts. Distance may be reduced to 60 cm
to align with the AGA code.
•
Regulations concerning the discharge of air
have to be fulfilled
A
WARNING: Failure to install the
screws or fixing device in accord-
ance with the instructions may re-
sult in electrical hazards
•
The cooker Range Hoods should be placed at a
distance of 65-75 cm from the cooking surface
for best effect. (See Pic 1)
3 Installation Instructions
65cm
75cm
Pic 1
Way one: (See Pic 2A)
•
To install onto the wall drill 2 holes of Ø8mm on
a suitable place according with the centre dis-
tance of hole in the back of the cooker Range
Hood.
•
Insert the wall plugs into the holes.
•
Insert the screws (ST4x30mm) into the wall
plugs and tight the screws.
•
Put up the cooker Range Hood onto the screws
(ST4x30mm).
•
Fix outlet on the Range Hood, remove the Alu-
minum Filter then fix the screws (ST4x30mm).
•
Put the one air outlet and extensible pipe onto
the cooker Range Hood. (the extensible pipe is
optional not supplied)
516 cm
496/795 cm
496 / 795
516
Pic 2A