background image

8/EN

 Do not climb on the product.

 

Unplug the product and close 

the tap if you are not going to 

use it for a long time. 

Maintenance and cleaning 

safety

 Do not wash the product by 

spreading or pouring water 

onto it.

 Do not use sharp or abrasive 

tools when cleaning the 

product. Do not use home 

cleaning products, detergent, 

gas, gasoline, thinner, alcohol, 

varnish etc.

NOTICE 

Do not forget to install 

the product’s filter back after 

you have cleaned it. Otherwise, 

pumps will get clogged and 

product will be damaged. 

Interior Lighting

 Depending on the model 

of your product, call the 

authorised service agent 

when it is required to change 

the LED/bulb used for lighting.

Environmental 

Instructions

Compliance with WEEE 

Directive and Disposing of 

the Waste Product

This product complies with 

EU WEEE Directive (2012/19/

EU). This product bears a 

classification symbol for 

waste electrical and electronic 

equipment (WEEE).

This symbol indicates 

that this product shall 

not be disposed with 

other household wastes 

at the end of its service 

life. Used device must 

be returned to official collection 

point for recycling of electrical 

and electronic devices. To find 

these collection systems please 

contact to your local authorities 

or retailer where the product was 

purchased. Each household 

performs important role in 

recovering and recycling of old 

appliance. Appropriate disposal 

of used appliance helps prevent 

potential negative consequences 

for the environment and human 

health.

2-

Summary of Contents for BDIN16431



















































Reviews: