Beko B7S-B7SLED, Service Handbook, Page: 51 / 100

B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
51
Picture 9.5 Front door disassembly /assembly
9.6. External Door
- Screws connecting the external door to the internal door are removed.
- External door is detached from the internal door by hand.
9.7. Inner Lid
- Front door group is removed. All components forming the front door group
are disassembled.
- They are collected with the new inner lid.
9.8. Front Door Glass
- Front Door group is removed.
-
External Door is removed.
-
Front Door Glass is detached from the tabs on the Inner Lid.
-
New glass is mounted (indent on the glass should align with the protrusion on
the inner lid). Take care not to break the tabs which hold the glass on the
inner lid, while mounting the glass.
9.9. Lock Hook
-
External Door is removed.
-
2 screws holding the hook on the Inner Lid are removed.
-
Lock hook is replaced and two screws are fixed into their places again.
9.10. Hinge
-
Front door is removed. External door is removed.
-
4 screws connecting the hinge holder to the inner lid are removed.
-
Four plastic hinge bushings which were removed from the old hinge are
attached onto the new hinge and the new hinge is seated onto the inner lid in
this way.
-
Hinge holder is screwed onto the hinge, external door is screwed onto the
inner lid.
-
Front door group is screwed to the front wall.