Beko B7S-B7SLED, Service Handbook

Page: 13 / 100

B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
13
5.5. Connection to the water drain

End of the drain hose should be attached directly to waste water drain, lavatory or
bathtub.
WARNING: If the hose is dislocated during water draining, it will flood your house. Also, there is
risk of burning by hot water due to washing at high temperatures. In order to prevent such
situations and make sure that the machine performs water intake and discharge processes
without any problem, fix the drain hose securely.

The hose should be attached to a height of at least 40 cm, and 100 cm at most.
Figure 5.7

If the hose is placed at floor level or near to floor (less than 40 cm) and heightened later
on, water drain becomes difficult and laundry may come out extremely wet. Therefore,
follow the heights described in the figure.

To prevent the waste water to go back into the machine again and to ensure easy
drainage, do not immerse the end of the hose into the waste water or do not insert it into
the drain for more than 15 cm. Shorten it if it is longer than enough.

End of the hose should not be bent, it should be stepped on and Hose should not be
folded between the drain and the machine.

If the hose is not long enough, add the original extension hose to be supplied and use it
in this way. Hose cannot be longer than 3.2 m. In order to prevent water leaks, fasten the
extension hose and the drain hose of the product securely with a clips to prevent any
leak.