Installation and operating manual
EN
6
METPOINT
®
SF13
1.4. Transport and storage
Despite our best efforts regarding packaging, etc., the device might be damaged during transport. Upon delivery, please remove all
packaging material and inspect the device for visible damage. If you detect such damage, immediately notify the carrier company
and
BEKO
TECHNOLOGIES GMBH or one of its agents.
CAUTION
Damage caused during transport or storage
Incorrect transport or storage, or the use of unsuitable lifting equipment might cause damage to the
device.
•
The device must only be transported and stored by authorised and suitably trained technical
personnel.
•
If you detect any damage, do not start the device.
•
Adhere to the permissible storage and transport temperatures (see technical data).
•
Protect the device against direct sunlight and heat radiation.
The device must be stored in the original
packaging. Seal the packaging and store it in a
dry and frost-free room. Ensure that the storage
temperature does not exceed the limits specified
on the type plate.
Even when packaged, take suitable measures to
protect the device against the elements.
While in storage, secure the device so that it
cannot topple over or fall, and protect it against
vibration.
NOTICE
Recycling of packaging material
•
The packaging material is recyclable. Dispose of the packaging material according to the applicable
statutory regulations.
