Installation
Operating manual SENTA PUR L
V2.5 E
Page 14 of 64
6 Installation
The SENTA PUR L combination bathing lift is supplied ready for use.
6.1 Electrical connection
The SENTA PUR L combination bathing lift is equipped with a 24V-battery system. A
VDE 0100 and 0100-710 compliant power connection is required for the wall charging
unit.
In operation, the combination bathing lift is mains-independent.
6.2 Electric motor/battery unit
The SENTA PUR L combination bathing lift is equipped with a 24V-battery system.
This motor is self-locking and therefore protected against unintentional lowering of the
seat in case of malfunction or failure. The battery of the combination bathing lift must
be completely charged prior to the first use of the device.
Please check that the emergency stop switch is released (unlatched). To unlatch, turn
the emergency stop switch clockwise until it releases.
NOTE
The battery must be completely charged prior to the first use.
The charging time is approx. 4 hours.
Please check that the emergency stop switch is released
prior to moving the seat.
The emergency stop switch is released by turning the button to the right (i.e.
clockwise).
Summary of Contents for SENTA PUR L
Page 54: ...Appendix Operating manual SENTA PUR L V2 5 E Page 54 of 64 14 2 Dimensions of the SENTA PUR L...
Page 55: ...Appendix Operating manual SENTA PUR L V2 5 E Page 55 of 64 14 3 Declaration of conformity...
Page 63: ...Appendix Operating manual SENTA PUR L V2 5 E Page 63 of 64 Your notes...
Page 64: ...BEKA Hospitec GmbH Am R benmorgen 3 35582 Wetzlar Germany Phone Fax 49 0 6 41 9 22 20 0...
