Beka Hospitec 921077000, Original Manual

Page: 5 / 60

Introduction
Operating manual NORA Pro V0.1 E Page 5 of 60
2 Introduction
2.1 Preface
A correct use of the device is imperatively in order to ensure its proper and safe
functioning. Please read the provided operating manual carefully and observe in
particular the therein contained safety instructions.
The maintenance, inspection, assembly and installation as well as well as further
technical interventions on the product must only be executed by BEKA Hospitec or by
specialised companies authorised to this effect by BEKA Hospitec. The operation of the
product as well as technical interventions on the product must only be carried out by
specially trained personnel.
The NORA Pro is a medical device according to DIN EN 60601-1 / IEC 60601-1 and
DIN EN 60601-1-2 / IEC 60601-1-2 as well as MDR Medical Device Regulation (EU)
2017/745. The product is used for raising and transferring patients and care-dependent
persons.
If a serious incident should occur in connection with the use of the product or its
accessories involving a patient or user, contact your distributor or the manufacturer. In
the European Union, you are obliged to report serious incidents to the competent
authority of the respective member state. Other regulations may apply in other regions.
2.2 Liability and warranty
▪
On the basis of the information contained in this manual, the publisher accepts
no liability for damages resulting from improper, incorrect or inappropriate use of
the product. The product must only be operated by persons, who are familiar with
the manual and the product as well as the national regulations, laws and
prescriptions related to work, safety and accident prevention.
▪
The manufacturer of the product is only responsible for the safety and the
reliability of the product, if regular functional tests and checks are conducted.
Operate the product only with original accessories, otherwise the manufacturer’s
liability will expire.
▪
In case of technical interventions, such as extensions and fittings to our products,
which are not carried out by BEKA Hospitec either by a specialist company
authorised by BEKA Hospitec, all warranty rights on the modifications as well as
on the device or on the device function, which are related to the modification,
shall expire.
▪
For damages resulting from the use of spare parts and accessories, which are
not authorized by the manufacturer, any further liability of the manufacturer shall
be excluded.
▪
Please note that there might be minor differences between the images and
explanations contained in this manual and the actually supplied device. Subject
to technical modifications and error.
▪ The product is equipped with “B”-Type applied parts. All exposed, touchable,
conductive parts are thereby considered as applied part.