Beissbarth VLH 2140, Original Instructions Manual, Page: 24 / 220

1 692 826 073 2017-03-29
|
Beissbarth GmbH
24 | VLH 2140 | Important notes en
2. Important notes
Before start up, connecting and operating
Beissbarth products it is absolutely
essential that the operating instructions/
owner’s manual and, in particular, the
safety instructions are studied carefully. By doing so
you can eliminate any uncertainties in handling
Beissbarth products and thus associated safety risks
upfront; something which is in the interests of your own
safety and will ultimately help avoid damage to the
device. When a Beissbarth product is handed over to
another person, not only the operating instructions but
also the safety instructions and information on its
designated use must be handed over to the person.
Use of the product constitutes acceptance of the
following conditions:
Copyright
The enclosed instructions are the property of
Beissbarth GmbH or its suppliers and are protected
against reproduction by copyright laws, international
agreements and other national legal stipulations. The
reproduction or disposal of instructions or excerpts
thereof is impermissible and constitutes an offence. In
the event of contravention, Beissbarth GmbH reserves
the right to take legal action and assert claims for
damages.
Warranty
The use of non-approved hardware causes changes to
our products and thus results in the exclusion of any
liability and warranty claims, even if the hardware has
been removed again in the meantime.
It is not permissible to make any changes to our
products and these are only to be used together with
genuine accessories and genuine replacement parts.
Otherwise any warranty claims will be invalid.
Liability
Liability on the part of Beissbarth GmbH is limited
to the amount actually paid by the customer for the
product concerned. This exemption from liability does
not apply to willful damage or damage arising from
gross negligence on the part of Beissbarth GmbH.
3. Safety instructions
3.1 Mains voltage
Insulation damage and other faults may result
in accessible components being live.
Safety measures:
¶
Only ever use the power cord provided or a tested
power cord.
¶
Replace wires with damaged insulation.
¶
Do not open the operating unit.
3.2 Risk of injury, danger of crushing
In the event of excessive vehicle weight,
incorrect mounting of the vehicle or on
removing heavy objects, there is a risk of the
vehicle falling off the support arms or tipping
up.
Safety measures:
¶
The lifting platform is only ever to be employed for
the intended purpose.
¶
Carefully study and observe the warning notices for
operation in Section 6.
¶
Carefully study and heed all the information given in
Section 6.1.