1 695 600 538
2016-07-27
|
Program layout | Start Line MT 601 D | 31
en
7.2
Control buttons
Fig. 15: Control buttons
No. Name
Description
1
A
Enter distance of wheel from MT 601 D by hand.
R
Arrow upwards, increase value,
R
Arrow downwards, reduce value.
2
B
Enter rim width manually:
R
Arrow upwards, increase value,
R
Arrow downwards, reduce value.
3
D
Enter rim diameter manually:
R
Arrow upwards, increase value,
R
Arrow downwards, reduce value.
4
C
Calibration/reset button
5
ALU
Dynamic imbalance measurement for alloy rims
(optional)
6
T
Starting the self test to check the mainboard
(PCB)
7
OPT
Starting the optimization process of tires and
rims
8
F
Changeover between static / dynamic balancing
9
< 5 g
Precision display of imbalance value below 5 g
(0.3 ounces)
10
mm/inch Changeover between millimetres/inches
11
START
START button, start of measurement
12
STOP
STOP button, stop measurement
!
Only press key by hand. Do not press using sharp
objects.
7. Program layout
7.1
Display
Fig. 14: LED screen
No.
Description
1
Left display panel A:
R
Distance of rim to MT 601 D
R
Value of imbalance on 1st balancing plane (inner)
2
Right display panel D:
R
Diameter of rim
R
Value of imbalance on 2nd balancing plane (out-
er)
3
Display of 1st balancing plane (inner)
4
Display of 2nd balancing plane (outer)
5
Display of balancing function and balancing method
6
Display of set unit
(millimetre or inch)
7
Average display panel B:
R
Width of rim
R
the static value
R
Instructions about the balancing weights
8
Display of set unit
(grams or ounces)
i
After starting MT 601 D the screen displays the
machine code and three display windows show "8.0
5.7 14.0".
Summary of Contents for Start Line MT 601 D
Page 2: ......
