Closing Seam Machine 1282-4 Working Instructions
- 16 -
Beisler Automated Sewing Equipment
Fig. 16
Fig. 16
B.3
Operation
B.3.8 Starting machine cycle
A machine cycle can be started in three different se-
quences (mode 00, mode 01, mode 02). The factory de-
fault is mode 00.
Controlling machine cycle in mode 00, Fig. 16:
Mode 00 starts a fully automatic machine cycle that is
controlled by the photocell.
1. Insert the trousers components into the guide clamp
and line them up over the contour guide at the pres-
sure foot.
2. As soon as the cloth material interrupts the light beam
of the photocell at the reflective film
1
, the machine
cycle starts. The photocell responds with a delay whose
duration can be set individually using the program
control.
• The trousers components are routed along the gui-
de rail to the contour guide.
• The contour guide controls the routing of the seam.
• The sewing unit sews the overlapping compon-
ents to each other.
• The sewing process is completed as soon as the
trousers components have passed the reflective
film of the photocell.
• The roller unit pulls the sewing piece from the
worktable to the stacker.
• The stacker stacks the trousers components.
NOTE - Supplying sewing pieces!
As soon as the guide clamp has returned to the inserti-
on station, the next machine cycle can be started.