manualshive.com logo in svg

Beisler 1282/4, Working Instructions, Page: 18 / 91

Share
Download
Beisler 1282/4 Working Instructions Download Page 18

- 9 -

Closing Seam Machine 1282-4 Working Instructions

Beisler Automated Sewing Equipment

B.2

Functions of the machine

Fig. 9

Control switches
Pedal for machine operation

The pedal 

3

 has two functions: It controls the machine

operation gradually and it can be used to change the
rotating speed of the sewing motor or the sewing speed
of the sewing unit in twelve stages.

Kneeswitch for machine operation

The kneeswitch 

4

 is used to start fully automatic

machine operation.

Reset switch

The reset 

5 

is used to restart the insertion process.

If the lower ends of the trousers components are not
clamped correctly into the guide clamp, actuating the
catch will open the guide clamp; when the reset switch
is pressed, the insertion process restarts.

B.2.4 Switches

The closing seam machine is equipped with three diffe-
rent types of switches:
•

Emergency switch for stopping a sewing program,

•

supply switch for current,

•

control switches for controlling the machine operation.

Emergency switch
Program stop switch

When the program stop switch 

1

 is pressed, all ma-

chine movements and the sewing process are stopped
immediately.
The switch engages when pressed. Rotating the switch
in the clockwise direction will unlock the switch, and
it moves back to its original position.
The control program performs a reset.

Supply switches
Main switch

The main switch 

2

 is used to turn the power supply

of the machine on or off. For safety reasons, the ma-
chine must be turned off using the main switch when
it is standing still for an extended period; in this case,
all functional units are deactivated. The main switch
also serves as an additional emergency off switch.

Fig. 9

Summary of Contents for 1282/4




























































































Reviews:

No comments