Beisler 1280/5, Operating Instructions Manual, Page: 34 / 77

1
6.4.5 Deleting a seam program
–
Press key “ P ”.
–
Press key “ 9 ”.
–
Press key “ F2 ”.
The display indicates:
DELETE?
–
Press key “ F2 ” anew.
The program is deleted.
–
Press key “ P ”.
You return to the selection menu.
6.4.6 Altering seam programs (Changing / Completing the sequence)
Note
Before a seam program can be altered,the parameter “56” has to be
set to the value “1".
This avoids that the existing programs are deleted inadvertently. (see
chapter 6.4.3, paragraph 1)
–
Select the program to be altered.
–
Press key “ P ”.
–
Press key “ 9 ” (S = sequence).
–
Select a free location with the keys “ Plus ” or “ Minus ”.
–
Select a seam number with the keys “ 1 ” to “ 9 ”.
You can select further seam numbers or quit the menu.
–
Select another free location with the keys “ Plus ” or “ Minus ”.
Or
–
Press key “ P ”.
The seam program is stored and you return to the selection menu.
31