18
Steps:
Enter the full RTMP URL and stream name/key in HEV-10W Encoder RTMP
lnterface, and click "Start" to live. When you need to stop your live steaming, click
"Stop” in this page. And you can click” Save” to save your settings.
Server URL:
To fill in the RTMP stream address of live stream platform. Each live
stream platform has different and unique RTMP push stream address.
Stream Key:
To fill the stream name/key of live stream platform. When the anchor
opens live streaming, the platform will generate unique keys.
Status:
It displays the connection status of the device and the live stream platform.
There are four status: connecting, connected, disconnecting and disconnected. Only
the status column is displayed as
“connected” after clicking “Start” can you live
streaming.
Authentication:
If you use a platform that requires authentication, please tick
authentication and fill in the authentication information provided by the platform in the
setting column of the encoder.
Note
: Before modifying the RTMP parameters, please ensure that the status column
is displayed as
“disconnected” so that the parameters can be modified.
7.5 Misc Stream
Misc Stream provides HEV-10W media stream address information. Decoding
terminal equipment or decoding software can play HEV-10W videos through
streaming media addresses. HEV-10W provides wired and wireless URLs. Please
choose according to your connection method.
The content described below will be
explained with wired URL, and the use of wireless URL is the same.