Operation
18
Beijer Electronics, MA00824
7.2
System Menu
Set the dip switch
SW7 = ON
. After the self-test, the system menu of the oper-
ator terminal is displayed on the screen:
The functions of the commands are briefly explained below:
System menu command
Function
Link
The operator terminal is connected.
F2 - Confg
Sets up the internal time clock and communication
parameters in the operator terminal.
Use , ,
and
to move to desired field; + and
- to set the value of the field.
F3 - Copy
Copies application data to another H-T60.
F4 - Set
Adjusts touch panel LCD contrast and clears data RAM.
See also section
F5 - Run
Runs the application.
