Programmable I/O (PIO) NA-9379, Basic setting
KI00341
2014-10
5.2
LED Indicator
LED Status when the module is operating normally
•
Green ON : MOD, RUN, IO
•
Yellow flashing and Green ON : LAN Port LED
5.2.1
MOD (Module Status LED)
Status
LED is
To indicate
Not Powered
OFF
Not power is supplied to the unit.
Normal, Operational
Green
The unit is operating in normal condition.
Device in Standby
Blinking Green
The EEPROM parameter is not initialized yet.
Serial Number is zero value (0x00000000)
IAP Mode
Flashing Green
IAP Mode : Available for firmware download using Firefox.
Minor Fault
Blinking Red
The unit has occurred recoverable fault in self-testing.
- EEPROM checksum fault.
Unrecoverable Fault
Red
The unit has occurred unrecoverable fault in self-testing.
- Firmware fault
5.2.2
NET (Network Status LED)
Status
LED is
To indicate
Not Used
-
-
5.2.3
RUN (PLC Run/Stop Status LED)
Status
LED is
To indicate
Not programmed
OFF
No power is supplied to the unit or Not programmed
Run
ON
PLC Run
Stop
Blinking Green
PLC Stop
Error
Blinking Red
Failure of Module Configuration
LED No.
LED Function / Description LED Color
MOD
Module Status
Green/Red
NET
Not used
-
RUN
Error Status
Green/Red
I/O
Expansion Module Status
Green/Red
Field Power
Field Power Enable
Green
www.beijer.se
5 (35)
K
I_eng_130531.
dot
, 070221