Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 86 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 77
Roaming Min Diff: The Absolute value of roaming RSSI value. The default value is 3(dbm).
Roaming Sensitivity: The different level will decide the roaming scan period.
Scan Channels: When Roaming is enabled. The client will scan the APs on scan channels
4.2.4
Wireless Access Control
This page allows you configure the Wireless Access Control list. You can configure Allow list or
Deny list for your wireless network on the AP/Gateway.
Access Control Mode: Allow Listed or Deny Listed.
MAC Address: Type the MAC address of the client which you want to Allow or Deny.
Press “Apply” to activate the new settings.
The lower screen shows the Wireless Access Control list you configured. Press “ Delete Selected ”
or ‘ Delete All ” to delete part of or all of the entries.
Press “Refresh” to refresh the table.