Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 18 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 9
Chapter 2 Hardware Installation
This chapter describes safety precautions and product information before installing JetWave 3200
Series.
2.1
Professional Installation Required
1.
Please seek assistance from a professional installer for field installation or professional IT
Engineer for indoor installation. These engineers must be well trained in the RF installation and
knowledgeable for the Wireless AP setup and field plan.
2.
The JetWave 3200 series is distributed through distributors and system installers with
professional technicians and will not be sold directly through retail stores.
Safety Precautions
1.
To keep you safe and install the hardware properly, please read and follow these safety
precautions.
2.
If you are installing JetWave 3200 series in the field box, for your safety as well as others’, please
seek assistance from a professional installer who has received safety training on the hazards
involved. Keep safety as well as performance in mind when selecting your installation site,
especially where there are electric power and phone lines. Please note the following things as
well:

Do not use a metal ladder;

Do not work on a wet or windy day;

Wear shoes with rubber soles and heels, rubber gloves, long sleeved shirt or jacket.
3.
If you are installing JetWave 3200 series in the indoor office or factory, be aware of the power
source and grounding must be well installed. The professional Wireless IT Engineer can provide
service for AP location, channel and field plan to get better performance and coverage.
4.
Users MUST use the safety certificated PoE switch/injector with the JetWave 3200 series. The
Industrial PoE Switch/adapter is recommended.
5.
When the system is operational with high gain antenna, avoid standing directly in front of it.
Strong RF fields are present when the transmitter is on.
6.
Note that Field EMD (Lightning) DAMAGE IS NOT COVERED UNDER WARRANTY.