Software
48
Beijer Electronics, MA00757A
4.2 Update Software
When an update is available, an e-mail is sent to the distributors. The software is also
available on the manufacturer’s web site.
The update should be installed by qualified personnel. When updating an operator
terminal it is important to ensure that the power is not interrupted during
the transfer.
4.2.1 Information Designer
Information Designer is not a freeware product. A demo version can be found on the
web site. To update this software, an accredited EXTER operator terminal dealer
must be contacted.
4.2.2 Remote Access Viewer
To update this program, go to
Support/
Downloads
/
FTP
in the menu. Run the .exe file and follow the instructions.
4.2.3 Image Loader
An upgrade of the complete software package is sometimes needed to take advantage
of new functionality. The complete software package consists of the EBOOT, the
Windows CE operating system and the system program. The upgrade is done by
running the Image Loader executable file, Bxxx_iml.exe. The Image Loader applica-
tion will help and guide you through the upgrade.
When the upgrade is finished, the operator terminal will receive the default IP ad-
dress 192.168.1.1. Follow the instructions on the screen after startup to change the
IP address.
The “Update Operator Terminal System Program” function in Information Designer
shall not be used when the Image Loader application is used to upgrade the operator
terminal.
Note:
ALL existing data, including the file system and the project application files, in the op-
erator terminal will be deleted (overwritten) by the Image Loader application
Note:
The Image Loader software is only intended for customers and partners that have an
operator terminal. No other distribution is allowed.
