GB
Sound module USM-RC-3
11.10.2021
BEIER-Electronic
31
Engine sound
The engine sound consists of several single sounds. Normally there is an engine
starting sound, an idling sound, a driving sound and an engine stopping sound. This
module also offers the possibility to imitate up to five different driving sounds (for
example for gears), up to eight change sounds between the driving sounds (for
example when you change the gears), a reverse warning sound, a breaking sound
and cornering squeak.
All engine sounds (therefore also the reverse warning and brake sound) are played
only when the engine sound is switched on (see page 34).
Start engine noise (cold– and warmstart)
The start engine sound is played when the engine sound is switched on. After the
starting sound is played, the sound changes into the idle sound.
If the engine sound is switched on and the vehicle is already in motion, the starting
sound will skip and the module directly plays the engine sound.
As an option, two different engine start sound can be used. The engine coldstart
sound (e.g. the starting takes longer, until the engine runs smoothly) and the engine
start sound for a warmstart (engine starts immediately). Which starting sound is
played, depends on how long the engine was running before. This time can be
configured in the Sound-Teacher. (Configuration
Engine sound
Time for
warmstart).
If you don’t need two different engine start sounds, you can use one of the two slots
for your engine start sound. The sound module always plays the sound slot, which is
filled with a sound.
Idle sound
The idle sound is always played when the vehicle is in idle. The sound is played in
an endless loop. Therefore just a short sound (approx. 1-5s) is required for this
sound slot. In general the longer the sounds file, the better the quality of the idle
noise.
Vehicle start sound
The starting sound is played uniquely when the vehicle sets off (idle
drive).
Vehicle stop sound
The stopping sound is played once as soon as the vehicle stops (drive
idle).
Engine stop sound
The engine stopping sound is played when the engine sound is switched off.
