PREAMP BOOSTER PB100
Thank you for showing your confidence in us by purchasing the BEHRINGER PREAMP
BOOSTER PB100. This high-quality effects pedal can be used to boost the volume and
shape the sound of any instrument. Thanks to its high-performance features you will be
able to match Piezo pickups to regular amp inputs or boost volume while playing solo parts.
1. CONTROLS
PB100 top view
The
BASS
control allows you to adjust the low-frequency range of the signal.
The
TREBLE
control allows you to adjust the high-frequency range of the signal.
The
GAIN
control adjusts the amount of preamplification.
The
ON/BATT
LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS
IN
connector to plug in the instrument cable.
The 1/4" TS
OUT
connector sends the signal to your amp.
Use the
DC IN
connection to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.
+
The PB100 has no on/off switch. As soon as you insert the jack into the IN
connector, the PB100 begins running. When not using the PB100, remove
the jack from the IN connector. This extends the life of the battery.
The
SERIAL NUMBER
is located at the bottom.
