guitar link ucg102
8
Installation for Windows
Installation for Windows
2.
2.1 Installing the UCG102
To install the USB AUDIO driver, proceed as follows:
Power on your computer.
1)
Insert the CD into your CDROM drive.
2)
Locate the folder "ASIO_driver" on the CD and open it.
3)
Double-click on "Setup.exe" to install the driver.
4)
Follow the on-screen instructions.
5)
Restart your computer after the installation has finished.
6)
To properly configure the driver for audio applications, proceed as follows:
Start the
1)
ASIO-USB Control Panel
from within the audio software (may be called
ASIO Config
or similar).
In the
2)
USB
tab, make your choice according to the screenshot.
