Behringer EUROPORT EPS500MP3, Quick Start Manual

Page: 15 / 36

Quick Start Guide
15
(EN)
Step 2: Controls
(1)
POWER SOURCE
– Connect the included IEC
cable to this socket and into a mains outlet.
(2)
POWER ON
switch turns the power to the unit
on and off.
(3)
USB
drive input jack for connecting an
external USB memory device.
(4)
MP3
PLAY/PAUSE
button
(5)
MP3
PLAYER RANDOM
button shuffles
playback of files from USB drive.
(6)
FWD
and
RWD
buttons for skipping to the
next or previous file.
(7)
LIMITER LED
and
VU METER
display the
signal level and when the LIMITER reduces the
signal in the event of a surge.
(8)
PHANTOM
power button engages 48 V power
for condenser microphones.
(9)
CONTOUR
button changes the frequency
boost to optimize for speech or music.
(10)
VOP
button dims the stereo channels when
there is signal activity on channels 1-4.
(11)
MAIN
volume knob controls the overall
volume to the MAIN outputs.
(12)
REVERB
knob adjusts the amount of reverb
applied to channels 1-4.
(13)
MONITOR SEND
knob adjusts the volume
of the signal routed out the MON left and
right jacks.
(14)
REVERB
button activates the reverb effect on
channels 1-4 individually.
(15)
LEVEL
knob adjusts the channel volume
(same for channels 1-8).
(16)
MIC/LINE
button switches between line level
input and balanced XLR input.
(17)
OPEN/LOCK
latches for attaching/detaching
the powered mixer from the speaker.
(18)
TREBLE/BASS EQ
knobs adjust
hi and low frequencies by ±15 dB
(same for channels 1-8).
(19)
CD IN/MP3 PLAYER
button switches
between a stereo signal connected to stereo
channel 7/8 and the onboard MP3 player.
(20)
CD IN L
and
R
stereo inputs for connecting an
external stereo source via RCA cables.
(21)
Same as inputs on channel 7/8.
(22)
AUX IN
jacks for connecting ¼" mono or
stereo sends from a single sound source.
(23)
LINE IN
jack connects instruments,
sub-mixers, or other line-level sources
(balanced or unbalanced) using cables with
¼" plugs.
(24)
MIC
input jack for dynamic or condenser
microphones connected with XLR cables.
(25)
MON
(ITOR)
OUT
jacks for routing stereo signal
to external powered speakers.
(26)
MAIN OUT
(PUT) jacks for connecting the
power amp to speakers using speaker cables
with ¼" plugs.
(27)
WIRELESS
mic dongle jack for use with
optional wireless microphones.
(28)
Speaker Cables (6100 mm x 2)
(29)
Power Cable
(30)
Mic Cable (6100 mm)
(31)
Mic Bag
(32)
Mic Stand Adapter Bracket
(33)
Mic Clip
(34)
XM1800S Microphone