ENGLISH
EUROLIVE B312A/B315A User Manual
5
Application Examples
3.
Turn the LEVEL control fully to the left before you switch
◊
on the unit with the POWER switch. Then, raise the volume
to a suitable level.
Using a mixing console
3.1
A common way to use 2 B312A/B315A loudspeakers is with a
mixing console. In this case, connect each of the main outputs
that are on the mixing console to a B312A/B315A loudspeaker.
The B312A/B315A includes XLR and ¼" connectors. To avoid
interference, use only XLR or ¼" jack cables.
Using several B312A/B315A
3.2
loudspeakers
For larger rooms, you can connect several B312A/B315A
speakers using the LINK OUTPUT connector
{3}
(see fig. 3.1).
Direct connection of a stereo
3.3
signal source
When you use two B312A/B315A loudspeakers, you can directly
connect one stereo signal source, for example, a CD player.
In this case, each of the speakers is connected to 1 signal-source
output. (If necessary, use the appropriate adaptor.)
Installation
4.
Both audio inputs of the BEHRINGER B312A/B315A and the
LINK OUTPUT connector are fully balanced. To maximize
interference compensation, try to establish balanced connections
to other equipment, whenever possible.
Make sure that only competent people install your
◊
B312A/B315A. They must be sufficiently earthed during
and after the installation process. Otherwise, electrostatic
discharges may negatively affect the operating characteris
-
tics of your equipment.
INPUT
INPUT
INPUT
INPUT
LINK OUTPUT
LINK OUTPUT
EUROLIVE B315A
Output Left
Output Right
XENYX 2442FX
Fig. 3.1: Wiring several B312A/B315A loudspeakers using the LINK
OUTPUT connector
Fig. 4.1: ¼" TRS connector
Fig. 4.2: XLR connectors
